Nantong Yunju New Material Technology Co., Ltd.

Search

Product Introduction

Product introduction
The products are divided into three series: furniture stone, ultra-thin stone and decorative stone. It can be used in any flat or single surface of the space.

Product advantages

1.Light weight, high strength, not easily damaged, easy to transport, handle and install, reducing building load.
2.Save construction time: Normal construction only requires 2-3 people. Floor construction is about 50㎡/person/day; large-size wall panel construction is about 80㎡/person/day.
3.Large size: maximum size 3000*1600mm, reducing cutting, fewer installation seams, and better decorative effect.
4.The product is thin: the thinnest one can be made into 1mm thickness and bonded to a flat base material, which greatly saves the thickness of the construction layer and increases the actual utilization of space.
5.The base material has strong plasticity and can be cut into various shapes, with any curved surface. It can be made into coffee tables, side tables, cabinet doors, countertops, single curves with larger diameters, and curved surfaces inside and outside. Screws can be screwed and slotted directly, and hinges can be installed through holes. The thickness can be produced according to requirements. It is the best stone product for prefabricated decoration.

Furniture stone

We use unique and leading technology to produce furniture products that are difficult or even impossible to make from raw stone. While retaining the texture and texture of natural marble, we make the products lighter and more beautiful. And the audience of marble furniture is not only oriented to the mid-to-high-end market, but also makes the acquisition of C-end customers broader.

Ultra-thin stone

The stone is as thin as paper: the minimum thickness of marble is 0.6mm, and the minimum thickness of granite is 1.5mm. Scope of application: Can be used as decorative surface materials, such as mobile phone cases, chargers, car cab countertops, lampshades, furniture veneers, etc.; Instructions for use: Directly paste on various flat and single surfaces with glue.

Decorative stone

1.Using 5mm thin stone and composite waterproof and fireproof base material, the thickness of the base material can be customized according to needs.
2.The base material can be grooved around, making installation quick and convenient (such as wooden floors), saving construction auxiliary materials, greatly reducing labor costs and shortening construction time.
3.Because it is ultra-thin, it is especially practical for renovation of old houses. There is no need to clean the original floor tiles or cement flat surface, and can be directly pasted.
4.Light weight, less than 20 kilograms per square meter. Due to the thin cutting of the stone, the weight is correspondingly lighter, only 1/20-1/2 of traditional marble.
5.It is quick to construct and saves manpower due to its light weight. It can be installed in large sizes and is quick to install, greatly shortening the construction time.
7.Can produce various specifications of wall panels, with a maximum size of 3000*1600mm.
8.Prefabricated wall panels can be grooved on all sides, glued, and dry-hanged, making construction quick and convenient.
9.The cost is reduced, the freight is low, the damage rate is low, and the installation auxiliary materials are less.
10.Less construction space is wasted. Because the board is light and thin, it can be directly pasted on a flat substrate with a thin construction layer.
11.It has a wide range of applications, keeping the indoor and outdoor decorative functions of traditional stone unchanged; expanding its application areas: packaging, gifts, furniture, culture, etc.